Andrew Foote
Mr. Induction
(817) 400-1060
(406) 334-5401
sales@mrinduction.com

Map

Hatch Glass

Hatch glass is removed very similar to the rear glass. Again remove all wiring connections to the rear glass defogger. Protect painted surfaces and or rubber encapsulation with Cold Shield Thermal Gel.

Heat a section of roughly 6 to 12 inches before attempting to separate glass from the pinch weld. Preferably using the L-wedge, leverage from the inside using slight outward pressure until the urethane bead breaks loose from the pinch weld.

Continue to work the rest of the glass loose until the entire hatch glass is removed.